Free tool — no sign-up. Reader-supported: if it helped, shopping through our buying guides below keeps it free. No extra cost to you. See guides ↓ As an Amazon Associate we earn from qualifying purchases.

A dehumidifier that’s too small runs all day without getting humidity down; one that’s oversized short-cycles in a small bedroom. Enter your room size and how damp it feels to get a pint-per-day recommendation and a target humidity range.

How it works

Pint ratings (pints of water removed per day) follow the industry association sizing logic: larger rooms and wetter conditions need more pints. We combine your square footage with a dampness level — slightly damp, very damp or wet basement conditions — and map it to the nearest common capacity (20, 30, 40, 50+ pints). Aim for 30–50% indoor relative humidity, per EPA guidance.

Capacity guide by room and condition

Room sizeSlightly damp (musty smell)Very damp (damp spots)Wet (seepage, basement)
Up to 500 sq ft20-pint30-pint40-pint
500–1,000 sq ft30-pint40-pint50-pint
1,000–1,500 sq ft40-pint50-pint60-pint / two units
Over 1,500 sq ft50-pint60-pint / two unitsTwo units or whole-house unit

For L-shaped spaces, closed-off rooms or a dehumidifier placed far from the damp spot, two smaller units often outperform one large one.

FAQ

Where should I place a dehumidifier?

In the dampest spot with several inches of clearance on all sides, doors closed, and a drain hose or nearby sink if you’ll run it continuously.

Why does my basement need a bigger unit?

Concrete walls wick moisture, temperatures are cooler (less efficient extraction), and seepage adds constant load — so basements typically need one tier larger than the square footage alone suggests.

More free tools